independent modeler

martedì 16 maggio 2023

Tomix N gauge wagon conversion in H0n30 gauge wagon - fast&easy

Do you need open wagons? Starting from a Tomix N scale model you can have a nice wagon in H0e/H0n30 in a simple way!

The model in question is the Tomix 2726 - J.N.R oper wagon Type Tora with an approximate cost of 700 yen.

First things disassemble, a simple operation that doesn’t involve any special precautions except a little delicacy.

The parts ready for painting!

The couplers have been replaced with ones from a Jellymodels model.

The tank was painted with Gaianotes lacquers and sealed with Tamiya matt clear coat.

Then proceed with the reassembly as in the photo.

Model finished!

domenica 7 maggio 2023

Narrow Gauge Box Cab Locomotive - 0n18

0n18 BoxCab Locomotive 1/48 - 9 mm

A box cab locomotive is a type of train engine where the cab or driver's compartment is enclosed in a box-shaped structure that is attached to the body of the locomotive. This design allows for better visibility for the driver and easier access to the controls.

Diesel box cab locomotives were first introduced in the mid-20th century as a replacement for steam locomotives. They quickly gained popularity due to their higher fuel efficiency, lower maintenance requirements, and more reliable operation. The diesel box cab locomotive uses diesel fuel to power its engines and move an electric generator, which powers electric traction motors that turn the locomotive's wheels.

These types of locomotives were used for a wide range of applications, from hauling freight and passenger trains to serving in industrial settings such as mines and factories.

Today, diesel box cab locomotives are still used in some industries, but have largely been replaced by more advanced locomotive designs such as the AC traction locomotive. Nonetheless, they remain an important part of the history of rail transportation and a fascinating subject for railway enthusiasts.

I made the 3D model in two versions H0e and 0n18.
The 3D models and prepared to use the TM-TR02 motorization.
The engine and cart will be separated from the Tomytec chassis and fit into the 3D printed lower chassis of the locomotive

>>You can buy 0n18 version on the Shapeways shop!<<

venerdì 3 marzo 2023

Maschinen Krieger Melusine - scale 1/20 Kit unboxing

domenica 26 febbraio 2023

British tank Mk.IV Male - Tamiya motorized version 1/35 (motion test)

venerdì 24 febbraio 2023

Nacchin 1/100「なっちん１/１００」 - Cavico

mercoledì 2 novembre 2022

Flat Car H0e- 3D printed

A small painted and weathering service trolley.

The base is a 3D printed resin trolley.

I applied the primer to the trolley and then the color red leather for the frame and sand for the flat.

After a coat of semigloss lacquer a thin layer of chipping fluid was applied. After that a coat of acrylic Neutral Gray Tamiya.

A few minutes after applying the Neutral Gray, chipping was carried out with a flat brush and hot water.

To protect the chipping work, a coat of glossy lacquer was applied.

With light gray I emphasized the paint scrapings and the protuberances of the trolley, like a dry brush effect but focused on some parts.

After making the texture of the wood on the sand color with various shades of brown, a dark brown enamel filter was added and the whole was sealed with the transparent satin lacquer.